Spent a few hours improving the seams and fit of the various fiberglass tips, trying to get these pieces over the hump from one level of quality to the next.
1. Sanded the filled rivets on the elevators, and added filler to the front of the rudder horn to bring it up to the level of the nearby skin.
2. Filled a couple of remaining pinholes on the rudder bottom cap.
3. Sanded the filler on the leading edge of the VS cap.
4. Sanded the filled rivets on the HS caps.
5. Drilled the attach rivet holes on the right elevator cap from #40 to #30.